ETFE Resin for injection molding

1)high temperature resistance 2)fine anticorrosiveness 3)acid and alkali resistance 4)direct manufacutrers 5)flame retardant

Product Description:Ethylene - 4 fluorine ethylene (ETFE) is a new kind of fluorine carbon thermoplastic resin,is ethylene and polyflon under the certain proportion F40 resin, the polymerization generation are mainly applied in anti-corrosion lining. The material has ptfe corrosion-resistant propertiesof metal, it has unique strong adhesion properties, overcoming the ptfe for metallic not agglutinate disfigurement, together with its average expansion coefficient is close to the expansion coefficient of carbon steel, and the metal ideal ETFE become composite material, has excellent resistance to negative pressure characteristics. ETFE is a kind of to crystalline polymer, melting point 265 ~ 270 C; Density were 1.73 ~ 1.75 g/cm3; The long-term use of temperature can be in 60 ~ + 170 °C - with good chemical resistance, heat resistance, abrasion resistance, resistance to radiation and impact resistance and some insulation performance, especially mechanical properties is good strength and elongation at break in the PFA and FEP.

ETFE Technical Parameter ( Item No.: LC302)

Physical Performance	Specific Gravity (g/cm3)	1.73
	Melting Point (°C)	270±5
Mechanical Performance	Tensile Strength (MPa)	14-24
	Breaking Extension (%)	200-400
	Compression Intensity (MPa)	49
	Shore Hardness	60
	Coefficient of Kinetic Friction	0.4
	Melting Index	4-10
Thermal Performance	Maximal Temperature of Continuous Work (°C)	180
	Thermal Distortion Temperature (°C) (1.82 MPa)	74
	Coefficient of Linear Expansion x105(K-1)	9.0-9.3
Electrical Performance	Volume Resistance (Ω·cm)	1017
	Insulation Breakdown Voltage (3.2mm)	16
	Relative Dielectric Constant (1KHz)	2.4-2.6
	Dielectric Loss Angle Tangent Value (tanδ)(X106Hz)	0.0005